Carbo Furling Lead Block Assemblies
Harken recommends equipping every system with Carbo lead blocks for safe
furling from the cockpit. The 7404 kit's lightweight, UV-stabilized Carbo blocks
run exclusively on ball bearings for fast trimming under any load.
A 7402 ratchet maintains tension when spooling so the unit can furl smoothly
and easily. The 7403 outboard assembly allows furling line to travel outboard of
the stanchion to keep the sidedeck clear. Block mounts with a strong four-screw
clamp without removing the stanchion or lifelines. Use the 7401 40 mm block
on the bow pulpit as an inboard lead. Both the 7401, 7402 have ball and socket
bases to align blocks for smooth leads aft. The 7404 lead block kit provides a
complete system for most boats.
Stanchion Mount Bases
The 061 and 319 bases for Classic blocks leads furling line inside the stanchion.
Halyard restrainers prevent the halyard from wrapping around the foil on boats
where the swivel isn't mounted near the masthead. Stainless steel brackets
feature Hardkote-anodized aluminum sheaves that accommodate both wire
and rope. Halyard restrainers should not be used unless required.
Prefeeders and Snap Shackles
Prefeeders and snap shackles facilitate fast sail changes. The 7006 prefeeder
features Hardkote-anodized rollers with low-friction bushings.
Click here to view full product range & specs for the Harken Furling Accessories